top of page
xxxxxxxx.png

Shock Testing System

SVC-01 shock testing system consists of TL9204H vibration/shock measuring instrument, and TL9800-05 software; TL9204H is Built-in 4 CHS Charge amplifiers, IEPE signal conditioners, can input 4 CHS Charge, Voltage or IEPE sensors signal at the same times; Via USB2.0 interface connected with the computer. Built-in 2 CHS DA signal output, can generate half sine, trapezoidal wave, after peak sawtooth wave and pulse signal, etc. Multi I/O can control and detect a shock table. Real-time display working state, the measured acceleration value, pulse width, and velocity variation, measurement error, etc.; Automatic finish test report. Support the national standard, MIL standard, and custom standard. Apply for all kinds of shock tests, drop tests, impact tests, and vibration/shock test.


Main Parameters:

 Acceleration Amplitude(RMS):9.81m/s2(1g)±3%

 Input signal types: Charge(PE), Voltage, IEPE;

 The built-in Gain: Charge 0.1, 1,10,100 mV/pC; Voltage/IEPE: 1,10,100 mV/mV;

 The built-in filter: built-in analog filter + digital anti-aliasing filter;

 AD sampling rate: real-time sampling rate per channel 1 MHZ;

 DA conversion rate: 500 kHz;

 Sampling method:Iinternal trigger;External triggering; continuous recording etc;

 Measurement Range: 1 to 100000 g(PK);

 Measuring pulse width: 0.201 mS to 3000 mS;

 4-input, 2-output;

 Customized software for needs;

Apply for vibration/ shock testing and calibration.;

st.png

 


Vibration Calibration System

VSC-03 Vibration calibration system consists of a TL9800-03 vibrator test software module, TL9204H controller, and vibration sensors. Can finish to test and calibrate for almost vibrators according to relevant national verification regulation. Offers the distortion degree, the transverse vibration, amplitude uniformity, and other related parameters. Automatically save the result of the test, easy to make relevant reports.

 

vsc03.png

 

Vibration Control System

VSC-02 Vibration control system consists of TL9800-03 vibration control software and TL9204H controller. VSC-02 can automatically finish controlling according to preset vibration level such as vibration acceleration, velocity and force amplitude, etc.

 

vsc02.png

Shock calibration system

SVS-02 Shock calibration system consists of TL9800-10 shock test software modules, a TL9204H controller, and a shock accelerometer. Can finish to test and calibrate almost shock tables according to the relevant national standard, MIL standard, and user-defined standards. Automatically save the result of the test, easy to make a relevant reports.

svs.png
bottom of page